
Interior Finishing
Panelled feature wall
Moulded wall panelling set out around the sconces and taken to a flat white finish, with the joints filled and sanded before painting so the frames read as one surface.

Surface work either holds up under close inspection or it does not. Every project below is from a real NCR home, shot on site rather than staged.
Each pair is the same room, photographed again after the work.
Home Painting
After
BeforeHome Painting
After
BeforeHome Painting
After
BeforeWaterproofing
After
BeforeWaterproofing
After
BeforeSpray Gun Polishing
After
BeforeInterior Finishing
After
BeforeFilmed on site by our own crew, not staged for a camera.

Interior Finishing
Moulded wall panelling set out around the sconces and taken to a flat white finish, with the joints filled and sanded before painting so the frames read as one surface.

Interior Finishing
Full-height panelling across the living wall, finished in white and cut in by hand against the cornice and the skirting.

Home Painting
Walls, ceiling and cove finished, floors cleaned and the room handed back empty — the state every job is walked through in.

Interior Finishing
Tiled splashback and counter run finished around the sink, with the wall above brought to a clean line at the tile edge.

Home Painting
Furniture wrapped and the floor sheeted before a tin is opened. This is the stage that decides whether you get your home back in the condition you left it.

Home Painting
A corridor mid-job: everything covered, the marble floor protected, and the cove work already finished overhead.

Interior Finishing
Panelling finished on the walls while the room stays wrapped — the furniture does not come out of its sheeting until the last coat is dry.

Home Painting
Openings sheeted to keep dust in the room being worked on and out of the rest of the home.

Home Painting
Lavender walls run into a blue end wall, cut in clean against the cove line and the dark polished floor.

Home Painting
Walls finished around an existing cove-lit false ceiling and a fluted feature wall, with trims cut in by hand.

Home Painting
A maroon damask motif stencilled by hand in an even repeat over a salmon base — every position set out on the wall before the first pull.

Spray Polishing
Solid teak doors and matching frame finished in a clear polish that leaves the grain readable rather than burying it.

Spray Polishing
Sliding door, open bay and drawer run sprayed on site to an even grey film — no brush drag on the flat faces.

Spray Polishing
Raised panels and a fluted centre band sprayed so the moulding profile stays crisp and the film stays even in the corners.

Interior Finishing
A lace-pattern mandala in low relief with hanging bell motifs, framed by fine repeating borders and finished in white.

Interior Finishing
Straight white lines taped and cut across a deep teal base, each intersection set out so the facets meet cleanly.

Home Painting
Cream walls run the length of the corridor and into the rooms beyond, cut in clean against the dark timber frames and the tiled floor.

Spray Polishing
Raised-panel doors and their frames sprayed to an even white film, with the moulding profile left crisp where a brush would have loaded the corners.

Spray Polishing
A glazed double door and its fanlight sprayed white, the glazing bars kept sharp along every edge.

Interior Finishing
A coffered POP ceiling picked out in white against a soft green, finished alongside a mirrored panel run with the floor still sheeted.

Interior Finishing
Recessed lights, a magnetic track run and a faceted panel section finished flush into one continuous ceiling plane.

Waterproofing
Full membrane laid across the slab and turned up the parapet in a coved fillet, detailed at the drain outlets.

Waterproofing
Source traced before any treatment was quoted, then the affected face replastered and repainted flat.
For a trade business, proof is the marketing. Here is the shooting standard every completed job is captured against.
Before, from a fixed point
Same angle, same framing, shot before a single sheet goes down.
Work in progress
Masking, prep and the spray setup — the stages that prove the process.
After, matched framing
Identical angle and lighting so the comparison is honest, not flattered.
Close-up detail
Edges, terminations and sheen under raking light, where quality shows.
Every project is shot only with the homeowner's permission, and we never publish identifying details of a property.
Every review is tied to a real service and a real locality.

We measure, inspect the surface condition and hand you a fixed per-square-foot quote. No cost, no obligation, no pressure to book on the spot.